Small, low cost, artificial kidney

Disposable hemodialyzer is described that can be used at home by non-medically trained personnel. Short lengths of semipermeable membrane tubes are arranged in parallel, supported by plastic mesh and encased in epoxy at ends. Tubes are connected to input and output blood manifolds which are separated by dialysate chamber. Daily dialysis requires only two hours or less

Self-adjusting multisegment, deployable, natural circulation radiator Patent

Development and characteristics of natural circulation radiator for use with nuclear power plants installed in lunar space station

Asynchronous transfer mode link performance over ground networks

The results of an experiment to determine the feasibility of using asynchronous transfer mode (ATM) technology to support advanced spacecraft missions that require high-rate ground communications and, in particular, full-motion video are reported. Potential nodes in such a ground network include Deep Space Network (DSN) antenna stations, the Jet Propulsion Laboratory, and a set of national and international end users. The experiment simulated a lunar microrover, lunar lander, the DSN ground communications system, and distributed science users. The users were equipped with video-capable workstations. A key feature was an optical fiber link between two high-performance workstations equipped with ATM interfaces. Video was also transmitted through JPL's institutional network to a user 8 km from the experiment. Variations in video depending on the networks and computers were observed, the results are reported

Deep Space Network information system architecture study

The purpose of this article is to describe an architecture for the Deep Space Network (DSN) information system in the years 2000-2010 and to provide guidelines for its evolution during the 1990s. The study scope is defined to be from the front-end areas at the antennas to the end users (spacecraft teams, principal investigators, archival storage systems, and non-NASA partners). The architectural vision provides guidance for major DSN implementation efforts during the next decade. A strong motivation for the study is an expected dramatic improvement in information-systems technologies, such as the following: computer processing, automation technology (including knowledge-based systems), networking and data transport, software and hardware engineering, and human-interface technology. The proposed Ground Information System has the following major features: unified architecture from the front-end area to the end user; open-systems standards to achieve interoperability; DSN production of level 0 data; delivery of level 0 data from the Deep Space Communications Complex, if desired; dedicated telemetry processors for each receiver; security against unauthorized access and errors; and highly automated monitor and control

Development of radiation hard scintillators

Substantial improvements have been made in the radiation hardness of plastic scintillators. Cylinders of scintillating materials 2.2 cm in diameter and 1 cm thick have been exposed to 10 Mrads of gamma rays at a dose rate of 1 Mrad/h in a nitrogen atmosphere. One of the formulations tested showed an immediate decrease in pulse height of only 4% and has remained stable for 12 days while annealing in air. By comparison a commercial PVT scintillator showed an immediate decrease of 58% and after 43 days of annealing in air it improved to a 14% loss. The formulated sample consisted of 70 parts by weight of Dow polystyrene, 30 pbw of pentaphenyltrimethyltrisiloxane (Dow Corning DC 705 oil), 2 pbw of p-terphenyl, 0.2 pbw of tetraphenylbutadiene, and 0.5 pbw of UVASIL299LM from Ferro.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/31055/1/0000732.pd

The NMR restraints grid at BMRB for 5,266 protein and nucleic acid PDB entries

Several pilot experiments have indicated that improvements in older NMR structures can be expected by applying modern software and new protocols (Nabuurs et al. in Proteins 55:483–186, 2004; Nederveen et al. in Proteins 59:662–672, 2005; Saccenti and Rosato in J Biomol NMR 40:251–261, 2008). A recent large scale X-ray study also has shown that modern software can significantly improve the quality of X-ray structures that were deposited more than a few years ago (Joosten et al. in J. Appl Crystallogr 42:376–384, 2009; Sanderson in Nature 459:1038–1039, 2009). Recalculation of three-dimensional coordinates requires that the original experimental data are available and complete, and are semantically and syntactically correct, or are at least correct enough to be reconstructed. For multiple reasons, including a lack of standards, the heterogeneity of the experimental data and the many NMR experiment types, it has not been practical to parse a large proportion of the originally deposited NMR experimental data files related to protein NMR structures. This has made impractical the automatic recalculation, and thus improvement, of the three dimensional coordinates of these structures. We here describe a large-scale international collaborative effort to make all deposited experimental NMR data semantically and syntactically homogeneous, and thus useful for further research. A total of 4,014 out of 5,266 entries were ‘cleaned’ in this process. For 1,387 entries, human intervention was needed. Continuous efforts in automating the parsing of both old, and newly deposited files is steadily decreasing this fraction. The cleaned data files are available from the NMR restraints grid at http://restraintsgrid.bmrb.wisc.edu